Barco Nio 5MP LED, Руководство пользователя

Страница: 13 / 51

2. Installation
W
ARNING
:
Use an arm that is approved by VESA (according to the VESA 100 mm stan-
dard).
Use an arm that can support the weight of the display. Refer to the technical speci fi ca-
tions of this display for the applicable weight.
Overview
The panel, standard attached to the tilt & swivel foot, is compatible with the VESA 100 mm standard. So
it can be used with an arm stand according to the VESA 100 mm standard.
Therefore, the tilt & swivel foot must be removed from the panel.
1. Put the display in the lowest position and lock the height mechanism.
Image 2-10
2. Put the display face down on a clean and soft surface. Be careful not to damage the panel screen.
3. Remove the plastic cover with a
fl athead screw driver.
Image 2-11
4. Slide the plastic cover over the neck of the foot.
Image 2-12
K5902121 NIO 5MP LED DISPLAY 18/01/2018 11