Cleaning
46
acts like compressed air for a quick and safe removal of dust
particles and other dry contaminants on the surface of the lcd
panel or the glass panel.
Attention
: The dust remover contains a liquid gas. If you shake the
can or move the can too fast while spraying, you may blow drops
of liquid on the panel surface!
If this is the case, clean the panel as described below.
2.
If the LCD panel is dirty or wet, take a lint-free, nonabrasive cloth
and lightly moisten the cloth with a solution of 25% Isopropyl
Alcohol (IPA) and 75% de-ionized or distilled water. E.g.: Cleareen,
a product of Certified Laboratories.
3.
Gently clean the panel with the moist cloth.
4.
Take another clean, dry, soft, lint-free cloth and gently wipe the
glass dry.
Cabinet
• Clean the cabinet using a recognized cleaning product for
medical equipment. The cloth you use must be moist, not wet!
• Repeat with water only and wipe dry with a dry cloth.
• The cabinet has been tested for resistance to the following
products:
Cidex, Betadine, Alcohol (Isopropyl and Ethyl), Ammonia-based
cleaners (Windex) and Aquasonic Gel.
Содержание MVGD 1318 CR/ER
Страница 1: ...Installation User Manual MVGD 1318 CR ER ...
Страница 2: ... This page intentionally left blank 2 This page intentionally left blank ...
Страница 58: ...Warranty Statement 58 ...
Страница 59: ...www barco com K5904082 01 October 2006 ...