Operation
41
Firmware
Firmware is a submenu from General Information, containing the
following items:
Locking and unlocking user controls
The User Controls function allows to disable or enable the control wheel
functions.
When user controls are disabled, you cannot:
• display and use the Extended OSD
• switch the display in stand-by mode
To disable user controls:
1.
When the OSD is not on the screen, rotate the control wheel to
display the Extended OSD. The Main Menu appears.
2.
Rotate the control wheel to select
Exit
.
3.
Press and hold the control wheel until the Advanced Main Menu
appears. This is indicated by an asterisk
(*)
in the menu header.
4.
Rotate the control wheel to select
Settings
.
5.
Press the control wheel to enter the Settings menu.
6.
Rotate the control wheel to select
User Controls
.
Name
Description
Boot Code Version
The version of the internal boot code
Run Code Version
The version of the internal run code
CPLD Code Version
The version of the internal CPLD code
FPGA Version
The version of the internal FPGA code
Preset Table Version
The version of the predefined Preset table
Scaler Version
The version of the scaler hardware
