Overview
12
The LED is
green
when the display is on (when enabled in the on-
screen menus).
The LED is
orange
when the display is in Stand-by power-saving
mode.
3.
Control wheel
The control wheel can be pressed like a push button and rotated
like a knob.
It allows to put the display in stand-by, navigate through the on-
screen display (OSD) menus and change values in the OSD.
Rear
Figure 2
1.
Connector compartment cover
To get access to the connectors, remove the cover by pulling down
the 2 clips at the longest side of the cover.
c
