Barco MDSC-8532 Скачать руководство пользователя страница 40

Страница: 40 / 64

R5914105 /01 MDSC-8532

5.1 Troubleshooting list

To diagnose a problem

Problem description

Action

Black bars visible on upper and lower or left and
right positions of the display.

This happens when the signal aspect ratio is
different from the one of the screen. This is not a
display malfunction.

The OSD menu cannot be operated.

The Control lock function has been enabled. This is
not a display malfunction. See

“Control lock”, page

The screen is black, but the logo is visible after
display switch on.

Check the input signal.

The screen is black, no logo is visible after display
switch on, the front LED is visible.

Possible LCD panel failure.

The screen is black, no logo is visible after display
switch on, the front LED is not visible.

The display is not powered or the unit is not working.

DP, HDMI, DVI input is available but no image is
displayed.

Check if the input signal has HDCP revision > 1.4

The message “WARNING ! FAILSAFE MODE –
check display settings” appears on screen during
start-up of the monitor.

Reboot the monitor.

The message “WARNING ! FAILSAFE MODE –
check display settings” appears on screen during
firmware field upgrade.

Reboot the monitor and run the upgrade procedure
again.

A permanent small text message on the top-right
corner “Failsafe mode” is visible, even after
rebooting the monitor.

The display can be used in failsafe mode as
temporary backup, running a factory FW (see the
FW version on OSD menu). Please contact the
Service Center.

Troubleshooting

Содержание MDSC-8532

































































Результаты поиска

Содержание MDSC-8532

Отзывы:

Похожие инструкции для MDSC-8532

Бренды по названию

Популярные бренды

Barco MDSC-8532, Руководство пользователя

Результаты поиска

Содержание MDSC-8532

Отзывы:

Похожие инструкции для MDSC-8532

Бренды по названию

Популярные бренды