Barco MDSC-8358 MNA Series, Руководство пользователя

Страница: 36 / 54

K5902141 (451920612593) /02 MDSC-8358 MNA
36
• Sufficient expertise is required for installing this equipment, especially to determine the strength of the wall
for withstanding the display's weight. Be sure to entrust the attachment of this equipment to the wall to
licensed contractors of Barco and pay adequate attention to safety during the installation and usage.
• Barco is not liable for any damage or injury caused by mishandling or improper installation.
Malfunctions
Disconnect the equipment ’ s power cord from the AC inlet and refer servicing to qualified service technicians
under the following conditions:
• If the power cord or plug is damaged or frayed.
• If liquid has been spilled into the equipment.
• If the equipment has been exposed to rain or water.
• If the equipment does not operate normally when the operating instructions are followed. Adjust only those
controls that are covered by the operating instructions since improper adjustment of other controls may
result in damage and will often require extensive work by a qualified technician to restore the product to
normal operation.
• If the equipment has been dropped or the cabinet has been damaged.
• If the product exhibits a distinct change in performance, indicating a need for service.
General warnings
• All devices and complete setup must be tested and validated before taking into operation.
• The installer needs to foresee a backup system in case the video falls away.
Technical data
• The monitor is intended for indoor use
• The monitor has been designed to be used in landscape position.
• Power consumption: 250W (depending on the Backlight level)
• Operating Temperature: 10-35°C for performance / 0-40°C for safety
• Operating Humidity: 10%-90% RH
• Operating Altitude: 3000m max.
• Storage: -20 ÷ +60°C; 10 ÷ 90%RH
• IP Protection: IP20 (IP21 for versions with protective glass)
• Class I Equipment, according to the type of protection against electric shock
• The monitor is not intended to be sterilized
This apparatus conforms to:
Medical equipment:
MDD 93/42/EEC amended by 2007/47/EC, Class I
Safety
IEC 60601-1 Edition 3.1 (2012)
EN 60601-1:2006 +A1:2013 +A12:2014
ANSI/AAMI ES60601-1: A1:2012, C1:2009/(R)2012
A2:2010/(R)2012 CSA CAN/CSA-C22.2 NO. 60601-1:14
EMC
IEC/EN 60601-1-2: 2014
EN 55011 / CISPR11 (Class A)
FCC CFR 47 Part 15 Subpart B (Class A)
Marks:
CE; DEMKO; c-UR-us
National Scandinavian Deviations for CL. 1.7.2
Finland: "Laite on liitettävä suojamaadoituskoskettimilla varustettuun pistorasiaan"
Important information