Barco MDSC-8358 MNA Series, Руководство пользователя

Страница: 20 / 54

K5902141 (451920612593) /02 MDSC-8358 MNA
20
Overview possible inputs
1. DVI
2. DisplayPort
3. DVI splitter
To connect the SFP+ 10 Gigabit video-over-IP optical interface, please refer to the “ MNA-240 User
Guide ” “ (reference K5903061) ” .
3.4 Video output connection
WARNING: When the display is assembled in the medical system, take care of the anchorage of all
cables, to avoid unwanted detachment.
To connect the video outputs
1. Connect the available display(s) to the corresponding video output(s) using the appropriate video cable(s).
1
1 1 1
Image 3-3
Overview possible outputs
1. DVI splitter
The DVI single link connection cables 0.5m included in the box can be used to connect two outputs
of the video splitter to two inputs of the monitor.
3.5 Nexxis OR
Overview
Connecting your MDSC-8358 MNA to Barco's Nexxis OR system allows you to distribute video, graphics,
audio and computer data over the IP network, in raw uncompressed format, inside the operating room and
even between surgical suites.
To connect your MDSC-8358 MNA to Barco's Nexxis OR system, connect the 10Gb Ethernet interface to your
Nexxis switch. More info about Nexxis OR and how to configure the MDSC-8358 MNA in your network is
available in the dedicated user guides. Please visit
www.barco.com to obtain these user guides.
Nexxis OR is only available on the MDSC-8358 MNA MNA version.
3.6 Power supply connection
To connect the power supply
1. Connect the power cord set into the AC power adapter
2. Plug the power connector of the adapter into the power port of the display.
Display installation