Barco MDSC-2326 DDIH, Руководство пользователя

Страница: 55 / 68

6. Important information
Installation
• Place the equipment on a fl at, solid and stable surface that can support the weight of at least 3 unis.
If you use an unstable cart or stand, the equipment may fall, causing serious injury to a child or adult,
and serious damage to the equipment.
• Do not allow to climb or rest on the equipment.
• When adjusting the angle of the equipment, move it slowly so as to prevent the equipment from moving
from or slipping off its stand or arm.
• When the equipment is attached to an arm, do not use the equipment as a handle or grip in order to
move the equipment. Please refer to the instruction manual of the arm for instructions on how to move
the arm with the equipment.
• Provide full attention to safety during installation, periodic maintenance and examination of this equip-
ment.
• Suf fi cient expertise is required for installing this equipment, especially to determine the strength of the
VESA arm for withstanding the display’s weight. Pay adequate attention to safety during the installa-
tion and usage.
• Barco is not liable for any damage or injury caused by mishandling or improper installation.
General warnings
• All devices and complete setup must be tested and validated before taking into operation.
• At end user application level it is necessary to foresee a backup unit in case the video falls away.
Technical data
• The monitor is intended for indoor use
• The monitor has been designed to be used in landscape position with a tilt of -10° (backward) and
+10° (forward)
• Power consumption: 24VDC 4A (for DDIH version), 24VDC 5A (for MNAH version)
• Operating Temperature: 10-35°C for performance / 0-40°C for safety
• Operating Humidity: 10%-90% RH
• Operating Altitude: 3000m max.
• Storage: -20 ÷ +60°C; 10 ÷ 90%RH
• IP Protection: IP21 (IP45 front side only), maximum tilt ±10 degree
• Class I Equipment, according to the type of protection against electric shock
• The monitor is not intended to be sterilized
• The monitor has not applied parts, but the front protective screen and the plastic enclosure have been
treated as applied part because considered accidentally touchable by the patient for a time <1 minute.
This apparatus conforms to:
Medical Equipment:
CE (MDD) Class I, essential requirements of MDD 93/42/EEC, version 2007 (in effect as of March 2010)
Safety:
EN 60601-1 (Ed. 3) +A1: 2013 +A12: 2014
IEC 60601-1 (Ed.3) +A1:2012
ANSI/AAMI ES 60601-1 (Ed. 3) +A1: 2012; C1:2009/(R)2012 and A2:2010/(R)2012
CSA CAN/CSA-C22.2 NO. 60601-1:14
EMC:
IEC/EN 60601-1-2: 2014
EN 55011 / CISPR11 (MDSC-2326 MNAH: Class A; MDSC-2326 DDIH: Class B)
K5902135 (451920612561) MDSC-2326 28/02/2017 53