5. Advanced operation
5.4.2
Language
About languages
The available languages for your display are:
•
English
•
Français
•
Deutsch
•
Español
•
Italiano
To select the language
1. Bring up the OSD main menu.
2. Navigate to the
Con
fi
guration
menu.
3. Enter the
Language
submenu.
4. Select one of the available languages and con
fi
rm.
5.4.3
Failover mode
About failover mode
This function allows the automatic switch to a de
fi
ned Backup source when the Main input signal is miss-
ing.
The display will automatically restore the Main input as soon as the signal is back.
The Backup source is the input selected as “2nd Picture Source” with “2nd Picture Mode” = “Off”.
This Main & Backup combination is stored at the moment the function “Failover mode” is set to “Enabled”.
Failover Mode is not selectable when either the Main Source or the 2nd Picture Source is set to “Au-
tosearch”.
Failover mode is automatically disabled when either the Main Source or the 2nd Picture
Source is changed. A warning message “Failover off” appears on the screen for a few
seconds.
Returning to the original Main & Backup combination will automatically re-enable the
Failover feature.
For the MNA version only, Failover mode will be activated 7 seconds after the Nexxis
signal becomes unavailable (delay required to allow a Nexxis layout change)..
To enable/disable failover mode
1. Bring up the OSD main menu.
2. Navigate to the
Con
fi
guration
menu.
3. Enter the
Failover mode
submenu.
4. Enable/Disable failover mode as desired and con
fi
rm.
(451920611391)K5903031 MDSC-2224 21/01/2014
41
