Barco MDNG-3220, Руководство пользователя

Страница: 28 / 47

5. Advanced operation
5.12 EDID timings
About EDID timings
Following EDID timings are available for your NIO 3MP LED Display:
Refresh Rate Allows to manually select between a low, medium
or high refresh rate of the image source video input
signal depending on the maximum refresh rate of
the display controller connected to your display.
Preferred Orientation Allows to change the orientation of the image
source video input signal to landscape, portrait or
to let the display automatically assign the correct
orientation.
Color Depth Allows to change the color depth to 8 or to 10 bit.
To manually set EDID timings:
1. Bring up the OSD main menu.
2. Navigate to the Con fi guration > Image Source menu.
3. Enter the EDID Timings submenu.
4. Select Refresh Rate, Orientation or Color Depth .
5. Select one of the available settings and con fi rm.
5.13 RGB->Y
About RGB -> Y
RGB –>Y is a conversion mode where gray is sent over the red, green and blue channel. This is done
by means of a standard conversion mechanism where 30% red, 59% green and 11% blue are used to
generate gray. This conversion mode can be enabled or disabled.
To enable/disable RGB->Y:
1. Bring up the OSD main menu.
2. Navigate to the Con fi guration > Image Source menu.
3. Enter the RGB->Y submenu.
4. Select Enable/Disable as desired and con fi rm.
5.14 Display info
About display info
Your display serial number, color type, native resolution, fi rmware versions, etc. are available in a dedi-
cated submenu of the OSD menu.
To retrieve info about your display:
1. Bring up the OSD main menu.
2. Navigate to the About this Display menu to make the information visible on the screen.
26 K5903503 NIO 3MP LED DISPLAY 15/10/2014