Barco MDFC-8232 3SW, Руководство пользователя

Страница: 37 / 70

37 R5913170 /00 MDFC-8232
HDMI 2.0 – 1
HDMI 2.0 – 2
• DP 1.1
• DVI
• SDI 3 (*)
DVI
SDI 3 (*)
• DP 1.1
• HDMI 2.0 – 1
• HDMI 2.0 – 2
Both primary and secondary input are limited to FHD resolution max.
The Video Parameters applied to the Primary input Source are also applied to the Secondary input.
The 2nd source keeps the same image size (Native/Aspect) as the Primary input Source.
(*) SDI 3 is only available if the SDI configuration mode is Dual SDI.
The available primary and secondary inputs depend on the display version (see “ Main source ” ,
page 34).
To select Picture and Picture input
1. Bring up the OSD main menu.
2. Navigate to the
Input Select menu.
3. Enter the PaP Input submenu.
4. Select one of the available PaP sources (or NONE) and confirm.
5.3.6 Picture in Picture input
About Picture in Picture input
This function is only available when the display is in 2D mode (see “ 2D / 3D mode ” , page 42).
This function allows the display to show a second input source as an inset window inside the main source.
The possible Picture in Picture combinations between the Primary input (main source) and the Secondary
input (PiP image) is displayed in the following table.
Primary input Secondary input
DP 1.2 MST / 1.1 / Dual
HDMI 2.0
– 1
HDMI 2.0 – 2
12G-SDI (on SDI 1)
DVI
SDI 3 (*)
Gamma and Color temperature for the PiP Source are always set to Native and 6500 K
independently from the Transfer Function applied to the Primary input Source.
(*) SDI 3 is only available if the SDI configuration mode is Dual SDI.
Advanced operation