Barco MDFC-8232 3SW, Руководство пользователя

Страница: 35 / 70

35 R5913170 /00 MDFC-8232
To select the main source
1. Bring up the OSD main menu.
2. Navigate to the
Input Select menu.
3. Enter the Main Source submenu.
4. Select one of the available main sources and confirm.
5.3.2 DisplayPort mode
About DisplayPort mode
The available DisplayPort (DP) modes for your display are:
• DP 1.2 MST L:R (MST stream 1 on Left side/ MST stream 2 on Right side)
• DP 1.2 MST R:L (MST stream 1 on Right side/ MST stream 2 on Left side)
• DP 1.1 main
• DP 1.1 dual
DP 1.1 main supports Full side by side (3840 x 1080). Please refer to the technical specifications for
an overview of accepted video formats.
DisplayPort mode DP 1.1 dual must be selected when the 3D format is set to Dual Stream (see “ 3D
format ” , page 42).
To select the DisplayPort mode
1. Bring up the OSD main menu.
2. Navigate to the
Input Select menu.
3. Enter the DP mode submenu.
4. Select one of the available DisplayPort modes and confirm.
5.3.3 Auto search
About auto search
By enabling the input selection auto search function, the display will automatically detect the connected
source and display it on the screen.
To enable/disable auto search
1. Bring up the OSD main menu.
2. Navigate to the
Input Select menu.
3. Enter the Auto search submenu.
4. Enable/Disable auto search as desired and confirm.
5.3.4 Failover input
About failover input
This function allows the display to automatically switch to a failover (backup) source in case the main source
(DisplayPort, HDMI, SDI 4K) is missing. The display will automatically restore the main source once the signal
is back.
The available failover inputs for your display depend on the selected SDI configuration mode. See the
following table for more details.
Main source Backup source
DP / HDMI / SDI 1
• None
• DVI
• SDI 3 (*1)
Advanced operation