Barco MDFC-8232 3HB, Руководство пользователя

Страница: 36 / 70

R5913170 /00 MDFC-8232 36
DP / HDMI / SDI 1 / SDI 3 (*2)
• None
• DVI
DP / HDMI / QUAD LINK 3G-SDI (*3)
• None
• DVI
The failover input can only be selected when both
1. the
Auto search function is disabled (see “ Auto search ” , page 35), and
2. the PiP/PaP Modes function is disabled (see “ Picture and Picture input ” , page 36 and “ Picture in
Picture input ” , page 37).
If any of both functions are enabled then failover will be disabled and made unavailable. As soon as
both functions are disabled again, failover will be enabled and made available again with the
selected failover input.
The failover input will be activated within about 7 seconds after the main source has been lost.
During the transition from main to failover input and vice versa, a text message is visible to inform
the user.
The main source can be changed while the failover input remains unchanged. During the selection
and synchronization of a new main source the failover function is temporary (7 sec) disabled.
(*1) SDI 3 is only available if the SDI configuration is Dual SDI.
(*2) The SDI configuration is Single SDI-1 / Single SDI-3.
(*3) The SDI configuration is Quad-SDI.
The available main sources depend on the display version (see “ Main source ” , page 34).
To select the failover input
1. Bring up the OSD main menu.
2. Navigate to the
Input Select menu.
3. Enter the Failover Input submenu.
4. Select one of the available failover inputs and confirm.
5.3.5 Picture and Picture input
About Picture and Picture input
This function is only available when the display is in 2D mode (see “ 2D / 3D mode ” , page 42).
This function allows the display to show a second input source on the left side of the display. The Primary input
(main source) is still displayed on the right half of the screen.
The possible Picture and Picture combinations between the Primary input (main source) and the Secondary
input (PaP image) is displayed in the following table.
Primary input Secondary input
DP 1.1
• HDMI 2.0 – 1
• HDMI 2.0 – 2
• DVI
• SDI 3 (*)
Advanced operation