Barco MCM-50, Руководство пользователя

Страница: 123 / 147

12. Maintenance
LED / Status
Not powered
Standby Con fi guring
(standby →
active)
Active IR activity Hardware error
STANDBY LED
(red) OFF ON ON OFF NA NA
ON LED (green) OFF OFF ON ON NA NA
ERROR LED
(red) OFF OFF OFF OFF NA ON
IR LED (green) OFF ON (in case
of network
connection)
OFF (no
network
connection
ON ON (in case
of network
connection)
OFF (no
network
connection
BLINKING NA
12.6 Identi fi cation
Description
The identi fi cation screen displays the device’s name, device’s address, software version used in the device, serial number of the
device and device runtime.
This data should always be known when contacting Barco’s Helpdesk.
Viewing the MCM-50 identi fi cation
1. In the OSD, navigate to General > Identi fi cation and press ENTER to select.
Image 12-7
2. In the text box that appears, you can view the identi fi cation data.
Image 12-8
3. Exit the menu.
12.7 Internal and scaled patterns
Introduction
The MCM-50 can be used to generate a list of patterns. The Scaled patterns are generated right after the input boards of the
MCM-50, whereas the Internal patterns are generated at the end of the image processing board, just before the signal is transferred
to the output board.
R5909057 MCM-50 17/05/2016 119