Barco MCM-400 HFR, Руководство пользователя

Страница: 51 / 214

6. Setup and configuration
6.5 Network con fi guration
Description
The MCM-400 HFR can be connected to a network allowing it to be accessed from and controlled by a device within the same (local)
network. The network connection can be used for following:
• fi le transfer;
• remote control;
• MCM-400 HFR fi rmware upgrade;
• debug logging;
• debugging.
Two types of network con fi guration can be set:
• Private subnet: unique fi xed IP addresses are used;
• DHCP network: the MCM-400 HFR is connected to a DHCP network where IP addresses are assigned automatically.
Network type Description
Fixed IP Manually assign an IP address, Subnet Mask, Default Gateway address.
• Set the IP address to the desired value. It identi fi es the MCM-400 HFR location on the
local network. The IP address must be unique within the local subnet.
• Set the Subnet Mask as appropriate for the local subnet.
• Set the Default Gateway to the IP address of the local router on the same local
network as this will be used to forward traf fi c to destinations beyond the local network.
If there is no router on the MCM-400 HFR local network then set this fi eld to any unique
IP address on the local network.
DHCP Enabling DHCP is meant for automatic IP address assignment.
A DHCP network lets network administrators centrally manage and automate the assignment
of IP addresses in an organization’s network. This is done by a DHCP server in the same
network. The DHCP server must be up and running at any time.
Depending on the lease time, a new IP address can be assigned to the MCM-400 HFR
on a regular base.
Network settings
The Ethernet con fi guration settings of the MCM-400 HFR are explained in the table below.
Parameter Description Type of fi eld
MAC Address MAC Address of the MCM-400 HFR
(programmed into the Ethernet board) Informative only
IP Address (Current) Current IP Address of the MCM-400 HFR Informative only
Current Subnet Mask Subnet Mask Informative only
Current Gateway Gateway Informative only
Use Fixed IP When this radio button is selected, the IP
address, Subnet Mask and Gateway (optional)
need to be entered manually. Tickable radio button
Use DHCP When this radio button is selected, the
MCM-400 HFR will dynamically obtain its IP
address from the DHCP server. This implies
that a DHCP server is active in the local
network and that a Host name is entered in the
MCM-400 HFR. Tickable radio button
IP Address IP address in case of Fixed IP Editable if Use Fixed IP is set.
Subnet Mask Subnet Mask in case of Fixed IP Editable if Use Fixed IP is set.
Gateway Gateway IP address (optional) in case of Fixed
IP Editable if Use Fixed IP is set.
Host name Host name in case of DHCP network Editable if Use DHCP is set.
Overview
• Con fi guring the MCM-400 HFR for a Private Subnet
• Con fi guring the MCM-400 HFR for a DHCP network
R5909056 MCM-400 HFR 11/05/2016 47