6. Mechanical setup of display walls with wall mount solutions
Wall mount 10
You might also consider to first connecting the
aluminum profiles using the t-bar connectors.
Insert the t-bar connectors into the profiles and
fix them using the headless screws (the screws
will cut through the profile)
Check for proper alignment!
Wall mount 11
In case the number of columns does not allow
connecting all profiles in advance,
Drill the holes for the first profile.
Fix this profile to the wall.
Mark and drill the holes for the adjacent profile.
Connect the adjacent profile and fix it.
Always check the alignment!
Wall mount 12
Drill the holes
The values X and Y are defined by the type of
anchor.
The anchors are not part of the delivery but
need to be selected according the type of the
building wall and the required pull-out force.
Anchor interface:
diameter M8
clamp range 20mm
pull-out force 1.2kN
Wall mount 13
Fix the profiles using the anchor and the wall
mounting plate R872581. The wall mounting
plate serves for perfect alignment!
Barco - LCD 5521 V4 - R591734 - Installation manual - Revision 00 - March-2017 _____________________________________________________________ 65