5. Mechanical setup of display wall with pedestals
Pedestal 61
Install all front access mount modules of the first
row.
Pedestal 62
When all front access mount modules of the first
row have been mounted,
place the connection plates.
Proceed as described when installing the connec-
tion plates on the pedestals:
Stand in front of the system.
First slide the rear side (bigger diameter) onto
the centering pins, then the front size (smaller
diameter, T-groove). Hold down the connection
plate while carefully fixing the second screw from
the bottom of the T-bar connector.
Do not forget to place the single element onto
the sides.
For a curved setup you can use a measuring chord to check the alignment:
Barco - LCD 5521 V4 - R591734 - Installation manual - Revision 00 - March-2017 _____________________________________________________________ 53
