Barco KVD5521, Руководство пользователя

Страница: 37 / 91

3. Cabling
3 Cabling
All interfaces are located on the rear of the system!
3.1 Signal cabling
When connecting signals to the displays
please mind the bandwidth available with
the respective input:
DVI:
165 MHz
DisplayPort: 300 MHz
HDMI: 300MHz
Lors de la connexion des signaux aux écrans
tenez compte de la bande passante
disponible à l'entrée respective
DVI: 165 MHz
DisplayPort: 300 MHz
HDMI: 300MHz
Since the displays support scaling and cropping, and since the active input has a loop-through connection to the
DisplayPort, connecting displays in loop-through saves long signal cables and avoids guiding dozens of cables
from the display to the controller.
3.2 IR Remote Control cabling
The IR Loop through in daisy chain is not supported! Do not use the interface IR Loop but connect each display to
its dedicated IR receiver.
ed
Barco - KVD5521, IVD5521, HVD5521 - R591341 - User Manual - Revision 05 - November 2016
_______________________________________________________
33