![background image](http://html1.mh-extra.com/html/barco/imagepro-ii-jr/imagepro-ii-jr_user-manual-addendum_3876304126.webp)
ImagePRO-II • User’s Guide
111
4. Menu Orientation
Operating the ImagePRO-II in Dual-Channel Mode
Figure 4-105.
Zoom/Pan Menu — Dual-Channel Mode (sample)
`êÉ~íáåÖ=~=sáÉï=áå=aì~äJ`Ü~ååÉä=jçÇÉ
To create a view for a channel in dual-channel mode, use the following procedure:
1.
Press the
PAN/ZOOM
button.
2.
On the
Zoom/Pan Menu,
select a channel. The options are
A
,
B
, and
All
.
If you select
All
, the settings are available to the inputs on both channels.
3.
Adjust the settings as described in
on page 78 of this chapter.
4.
After making all changes, press
SEL
. The submenu shown in the following
illustration appears.
Figure 4-106.
Save View Submenu — Dual-Channel Mode
5.
Press
SEL
to save the view. You are returned to the
Zoom/Pan Menu
. The view
you created is available to the inputs on the selected channel or channels.
This save persists across power cycles.
If, after creating a view for a channel, you wish to save the view to the system, you can do
so using the procedure described in
on page 80 of this
chapter. You can then recall the view to any input
on any channel, using the procedure
described in
on page 81 of this chapter.
_~ÅâáåÖ=ré=~=içÖç=áå=aì~äJ`Ü~ååÉä=jçÇÉ
To back up a logo to a flash drive in dual-channel system mode, use the following
procedure:
1.
On the
System Menu
, select
USB
. The
USB Backup/Restore Submenu
appears.
2.
Select
Backup Logo
. The
USB Backup Logo Submenu
appears, as shown in
the following illustration. The navigation cursor is at the Channel field.
ZOOM/PAN
A
> Channel
A
Zoom H
1280
Zoom V
960
SAVE VIEW
> Channel
A
View
View1
Save