Barco ILite Series, Руководство по установке

Страница: 36 / 43

3. Physical installation
5. Complete each power branch by connecting maximum six tiles with power linking cables to each other in a daisy chain manner.
The female C13 plug of the power linking cable is plugged directly in the tile. The male C20 and the female C19 plugs serve as
power loop through. The last female C19 plug in the chain is unused.
Warning: Maximum 6 (six) tiles per power branch are allowed. Connecting more then six tiles with one output cable will over-
load the circuit.
6. Attach long cables with cable ties to the frame.
7. Repeat step 2 and followings until all tiles are provide with power.
8. Connect the power box with the local power-net. In case the local power net is not provided with a earthwire an additional earth
connection must be installed and connected with the protected earth inside the power box.
Custom Power
Box (A)
MULTI POWER CABLE
(Multi pole)
(B)
ILite Spider
Connector
(C)
POWER
DATA
ILite
Tile
(D)
POWER
LINKING
CABLE
(E)
POWER
DATA
POWER
DATA
Image 3-22
A Custom Power Box.
B Multi power cable (Multi pole).
C ILite Spider connector.
D First ILite tile in a column of maximum six.
E Power linking cable.
Image 3-23
Spider support bracket.
3.6.3 Data cabling
Necessary parts
Data linking cables.
Data connections
1. Connect the data cable, coming from the digitizer, with one of the DVI connectors on the resync-unit of the first tile. The first tile
must be one of the tiles in the corner of the ILite display.
2. Complete the data path of the display by connecting all following tiles with data linking cables to each other in a daisy chain
manner. This daisy chain linking can be performed either in horizontal or vertical directions starting in a corner of the ILite display.
3. Specify in the setup controlling software how the data linking of the tiles is realized (Horizontal or Vertical) and which tile is the
first in the chain.
32 R5976522 FIXED ILITE DISPLAY 05042004