Barco ILite Series, Руководство по установке

Страница: 23 / 43

3. Physical installation
3. PHYSICAL INSTALLATION
Overview
• Installation of the support structure
• Preparation of the ILite assembly blocks
• Correct alignment of the ILite assembly blocks
• Attach the ILite assembly blocks
• ILite tile mounting
• Cabling of the ILite display
3.1 Installation of the support structure
Follow the important Safety Guidelines.
What has to be done?
Dependent on the circumstances and facilities available:
• The complete support structure is assembled and installed on its final position before the assembly blocks and tiles are at-
tached.
• The complete support structure is assembled on the floor first, and after the assembly blocks and tiles are attached, raised as
one structure to its vertical position and installed.
3.2 Preparation of the ILite assembly blocks
3.2.1 Assembly block positioning code
Understanding the position code
Each assembly block is coded with a letter followed by two numbers. The letter indicates the ILite display to which this assembly
block is part of (very useful incase there is more then one ILite display to install at the same location). The first number indicates the
row in which to assemble, the second indicates the column. This code starts counting from the assembly in the bottom left corner.
A.1.1 A.1.2 A.1.3
A.2.1 A.2.2 A.2.3
Image 3-1
ILite display H7 x V5 assembly block codes.
A.1.1
A.1.1
Image 3-2
Location of positioning code on an ILite assembly block.
R5976522 FIXED ILITE DISPLAY 05042004 19