![background image](http://html1.mh-extra.com/html/barco/icon-h250/icon-h250_installation-manual_4237633012.webp)
2. Hard disk recovery procedure
Image 2-15
2.4
iCon H250 / H400 server setup
Set the boot configuration to its original state
1. When the server restarts (on the first
beep
sound), press
F2
to enter the BIOS
2. Navigate to the tab
Boot
3. Use the
+
and the
-
key to move the
IDE 0
to the top of the Boot priority list
4. Navigate to the tab
Exit
5. Select
Exit Saving Changes
: the server will start to reboot
Setup the server again
1. After some minutes, you will be asked to enter the Windows
®
XP Product Key: enter this key. You can find it on a label on the
bottom plate of the projector
Image 2-16
2. Now the Windows
®
operation system reboots: you will be asked to enter the password. Enter the text:
Barco
Tip:
Check the configuration of your keyboard first (AZERTY or QUERTY)
3. Start the Auto-configuration by selecting
Now
10
R59770070 ICON H250 / ICON H400 31/01/2007
Содержание iCon H250
Страница 1: ...iCon H250 iCon H400 Installation manual R9010510 R9010500 R59770070 00 31 01 2007...
Страница 4: ...Table of contents 2 R59770070 ICON H250 ICON H400 31 01 2007...
Страница 6: ...1 Hard disk recovery kit 4 R59770070 ICON H250 ICON H400 31 01 2007...
Страница 14: ...2 Hard disk recovery procedure 12 R59770070 ICON H250 ICON H400 31 01 2007...