Barco ICMP Скачать руководство пользователя страница 62

Страница: 62 / 96

4. Troubleshooting

Code 10952: “player - play failed on slave player - cannot play” (Error)

Situation

Solution

The play cannot start
because the play command
failed on a slave projector.

Check the error that occurred on the slave projectors.

Code 10953: “player - change position failed on slave player - cannot play” (Error)

Situation

Solution

The play cannot start
because the change position
command failed on a slave
projector.

Check the error that occurred on the slave projectors.

Code 10954: “player - slave player not in slave mode - cannot play” (Error)

Situation

Solution

The play cannot start
because a slave projector is
not in slave mode anymore.

Connect to the slave projectors, make sure the slave mode is active,
reload the content on the master projector and retry.

Code 10955: “player - stop failed on slave player” (Error)

Situation

Solution

The stop command failed on
a slave projector.

Check the error that occurred on the slave projectors.

Code 10956: “player - clear failed on slave player” (Error)

Situation

Solution

The clear command failed on
a slave projector.

Check the error that occurred on the slave projectors.

Code 10957: “player - slave player not in expected state - cannot play” (Error)

Situation

Solution

The play cannot start
because the player of a
slave projector is not in the
expected state.

Check the state and any error that occurred on the slave projectors.

Code 10958: “player - missing license on master player - playing in standalone
mode” (Warning)

Situation

Solution

The expected multi-projector
license is not present or not
valid on the master. The
master can be in standalone
mode only.

Check the license on the master and request a new one.

R5906594 ICMP 09/11/2016

Содержание ICMP

































































































Результаты поиска

Содержание ICMP

Отзывы:

Похожие инструкции для ICMP

Бренды по названию

Популярные бренды

Barco ICMP, Руководство по обслуживанию

Результаты поиска

Содержание ICMP

Отзывы:

Похожие инструкции для ICMP

Бренды по названию

Популярные бренды