- 3 -
Switch off
1. Press the Power on/off button
for three seconds.
2. Wait until the after-cooling cycle is finished
(up to 300 sec.)
3. Turn the mains switch to off
(’0’).
4. Unplug the power cord
from the projector.
3
2
1
300 s
3 s
4
Local Keypad
1
Menu Navigation.
2
Menu Selection.
3
Open Menu.
4
Menu Back.
5
Power On/Off.
6
OSD On/Off.
7
Input Selection.
8
Shutter Open/Close.
9
Test Patterns.
10
Lens Menu.
11
Touch Panel.
1
2
3
4
5
6
10
11
9
8
7
• Remove the lens before transporting the projector.
• First switch the projector to Standby mode and wait until After Cooling is
finished to switch off the main power.
• Ensure the projector is operating with clean filters.
• Do not block the ventilation in and outlets.
• Laser light can cause severe damage to the DMD. This damage is
not covered by warranty.
Precautions