Barco HDX 3D, Руководство по установке

Страница: 5 / 11

1. HDx 3D Input Module
1. HDX 3D INPUT MODULE
About the HDx 3D Input Module
The HDx 3D Input Module is exclusively designed for Barco projectors based on the HDX platform, such
as the HDX W12, HDX W14, ... , HDF W22, etc.
Image 1-1
HDx 3D Input Module
Overview
• Functionality HDx 3D Input Module
• Physical installation
1.1 Functionality HDx 3D Input Module
Front panel
• 3D SYNC IN
BNC socket to apply an external 3D synchronization signal. Used for sequential modes. If signal is
not present an internal 3D sync is generated.
• DISPLAYPORT
DisplayPort connector to connect a video source.
• DisplayPort selection LED + sync LED
SEL: lights up if the DisplayPort is selected.
SYNC: lights up if the applied source has a valid DisplayPort sync.
• HDMI
Connector for HDMI™ cable (with optional locking mechanism).
• HDMI selection LED + sync LED
SEL: lights up if the HDMI input port is selected.
SYNC: lights up if the applied source has a valid HDMI sync.
• 3D SYNC OUT
BNC socket. Generates 3D synchronization signal to drive an infra red transmitter for active 3D
glasses. In case an 3D synchronization signal is applied on the “3D SYNC IN” for a single chan-
nel 3D stream then the generated 3D output sync is derived from this applied sync.
R5905197 HDX 3D INPUT MODULE 09/10/2012 1