![background image](http://html1.mh-extra.com/html/barco/hdf-w-series/hdf-w-series_installation-manual_474143096.webp)
9. Image
7. Use the
▲
or
▼
key to select
Black balance green
and adjust the Green black level until bright spots appear on the screen.
8. Use the
▲
or
▼
key to select
Black balance blue
and adjust the Blue black level until bright spots appear on the screen.
9. Use the
▲
or
▼
key to select
Black balance red
and adjust the Red black level until bright spots appear on the screen.
The projected image should now be noisy full black
Image 9-33
Main menu, Image
Image 9-34
Image adjustments
Image 9-35
Image settings, input balance
Image 9-36
If one uses a gray scale pattern, the bright spots should appear in the black bar.
Performing White input balance
1. Connect the source you want to project.
2. Press
Menu
to activate the menus and select
Image
→
Image Settings
→
Input Balance
. (image 9-37, image 9-38, image 9-39,
3. Press
ENTER
to select.
4. Do you want to use an internally generated test pattern ?
If yes, use the
▲
or
▼
key to select
Adjustment Pattern
and press
ENTER
to toggle between [on] and [off]
If no, select a white pattern (or gray scale as alternative).
5. Use the
▲
or
▼
key to select
White balance red
.
6. Adjust the red white level (gain) on a minimal value
7. Use the
▲
or
▼
key to select
White balance blue
and adjust the blue white level (gain) on a minimal value.
Note:
This minimal value is not necessary , provided that the 2 other colors are not in
fl
uencing too much the color to be adjusted,
in fact the aim is to minimize the effect of the two other colors since there is a risk of reaching too soon the transition
(bright spots) due to the contribution of these two other colors signals.
8. Use the
▲
or
▼
key to select
White balance green
and adjust the Green white level (gain) until bright spots appear on the screen.
9. Use the
▲
or
▼
key to select
White balance blue
adjust the Blue white level (gain) until bright spots appear on the screen.
10.Use the
▲
or
▼
key to select
White balance red
adjust the Red white level (gain) until bright spots appear on the screen.
92
R5905158 HDF W SERIES 10/07/2012
Содержание HDF W series
