Random Access Adjustment Mode
6-6
5976283 BARCOGRAPHICS 808s 160501
Port 2 : Video or S-Video
Port 2 can be used as a Video or S-Video input.
Highlight
Port 2
by pushing the control disc
é
or
ê
and press
ENTER
to toggle between VIDEO and S-VIDEO.
Select with or
<ENTER> to accept
<EXIT> to return.
PICTURE TUNING
COLOR BALANCE
PORT2 : S-VIDEO
LINE DOUBLER : ON
Line Doubler/Multiplier (option)
Line doubling/multipling is only possible for Video, S-Video,
Component Video images on standard line frequency and RGB
signals on 15 kHz.
To eliminate the video line patterns and to improve the image
stability, the line doubler/multiplier has to be switched on. The line
doubler/multiplier is default set in the ON position when starting up
for the first time. The setting of the line doubler/multiplier will be
saved together with the source number. Each time this source
number is selected, the last saved version will be loaded.
Highlight Line Doubler/Multiplier with the control disc and press
ENTER
to toggle between ON (active) and OFF (non active).
EXIT
will return to the random access selection menu.
Select with or
<ENTER> to accept
<EXIT> to return.
PICTURE TUNING
COLOR BALANCE
SYNC : FAST
PORT2 : S-VIDEO
LINE DOUBLER : ON
Color Select
Highlight
COLOR SELECT
by pushing the control disc forward or
backward and press
ENTER
to display the color select menu.
Select with or
then <ENTER>
<EXIT> to return.
RANDOM ACCESS
ADJUSTMENT MODE
PICTURE TUNING
GEOMETRY
CONVERGENCE
FOCUSING
COLOR SELECT
ORBITING
CONTR. MODULATION
SOFT EDGE
Select with or
<ENTER> to accept
<EXIT> to return.
COLOR SELECT
RED
GREEN
BLUE
RED AND GREEN
BLUE AND GREEN
RED AND BLUE
ENTER
continues to the color select menu
EXIT
will return to Internal Crosshatch Selection or Setup
Pattern Selection Menu
ADJUST
returns to operational mode
Use the control disc to highlight a color (CRT) or combination of colors
to display the projected image in that specific color.
To select a new color, press
ENTER
, the color selection menu
appears again on the screen. To terminate the color select proce-
dure, press
EXIT
.
ENTER
continues with the selected color or color combination.
EXIT
returns to the Random access main menu.
