![background image](http://html1.mh-extra.com/html/barco/graphics-6300/graphics-6300_owners-manual_473869007.webp)
2-2
Installation Guidelines
5975879 BARCOGRAPHICS 6300 14072000
B = Distance between ceiling and top of the screen or
between floor and bottom of the screen.
A = Correction value, distance between bottom side of
projector (without feet) and middle of the lens. Value to be
subtracted from B to obtain the correct installation position. (A
value is a constant value for all screen widths and type of
lenses, A = 124.1 mm or 4.89 inch)
CD = Total distance between projector and ceiling or projector
and floor.
SW = Screen width.
SH = Screen height (image height).
PD = Projector Distance, distance between screen and
projector.
Lens type selection.
a) Determine the required screen width.
b) Determine the approximate position of the projector in the projection
room with regard to the screen and measure the
projector-screen distance (PD).
c) Use the lens formulas in appendix B to find the best corresponding
PD with regard to the measured projector-screen distance for the
required screen width.
The desired lens is determined (the order number is given in the tabel
in the same appendix B). Start the installation procedure for the
projector as described in the manual.
Inputs and computer video format input compatibility :
Some examples :
VIDEO and S-VIDEO
COMPONENT VIDEO
RGB ANALOG with STANDARD SYNC (SYNC ON GREEN or
SEPARATE SYNC)
RGB ANALOG with TRI-LEVEL SYNC (SYNC ON GREEN or
SEPARATE SYNC)
VGA : 640 x 480 pixels
MAC : 640 x 480 pixels
Super VGA : 800 x 600 pixels
XGA : 1024 x 768 pixels
sources up to 1280 x 1024 pixels
Sources with pixel clock < 135 MHz
* How to install a projection lens?
The projector is supplied without any lens.
The following lenses are available, or will become available (contact a Barco service center) as an option :
QFD(1.27:1)
R9840400
QFD(2.5:1)
R9840290
QFD(1.4-2.1:1)
R9840380
QFD(2.1-3.0:1)
R9840390
QGD(3.5-4.5:1)
R9840060
Only when the lens shift is in it's nominal position.
Definitions of the Abbreviation on drawings
* Where to install the projector?
Screen
PD
B
Floor
Projector
CD
A
CD = B - A
SH
Optical axis projection lens
SH
SW
SIDE VIEW
BACK VIEW
Screen
TOP VIEW
SW
Floor
Screen
PD
B
Floor
Projector
CD
A’
CD = B - A
SH
Optical axis projection lens
SH
SW
SIDE VIEW
BACK VIEW
Screen
TOP VIEW
SW
Floor
OFF-Axis installation
ON-Axis installation