Barco G50, Руководство по установке

Страница: 8 / 76

R5916677 /00 G50 8
1.1 General considerations
General safety instructions
• Before operating this equipment please read this manual thoroughly and retain it for future reference.
• Installation and preliminary adjustments should be performed by qualified Barco personnel or by
authorized Barco service dealers.
• All warnings on the projector and in the documentation manuals should be adhered to.
• All instructions for operating and use of this equipment must be followed precisely.
• All local installation codes should be adhered to.
• Additional instructions to supervise children, no staring, and not use optical aids.
• Additional instructions to install above the reach of children.
• Notice is given to supervise children and to never allow them to stare into the projector beam at any
distance from the projector.
• Notice is given to use caution when using the remote control for starting the projector while in front of the
projection lens.
• Notice is given to the user to avoid the use of optical aids such as binoculars or telescopes inside the
beam.
• As with any bright light source, do not stare into the beam, RG2 IEC 62471-5:2015.
• WARNING: MOUNT ABOVE THE HEADS OF CHILDREN. The use of a ceiling mount is recommended
with this product to place it above the eyes of children.
• IEC/EN 60825-1: 2014 Laser class 1 RG2 or RG3.
• IEC/EN 62471-5:2015 RG2 or RG3.
Notice on safety
This equipment is built in accordance with the requirements of the applicable international safety standards.
These safety standards impose important requirements on the use of safety critical components, materials
and insulation, in order to protect the user or operator against risk of electric shock and energy hazard and
having access to live parts. Safety standards also impose limits to the internal and external temperature rises,
radiation levels, mechanical stability and strength, enclosure construction and protection against the risk of
fire. Simulated single fault condition testing ensures the safety of the equipment to the user even when the
equipment's normal operation fails.
Laser safety precautions
This product is classified as Class 1 Laser Product-Risk Group 2 of IEC 60825-1:2014 and also complies with
21 CFR 1040.10 and 1040.11 as a Risk Group 2, LIP (Laser Illuminated Projector) as defined in IEC 62471-5:
Ed.1.0. For more information, see Laser Notice No. 57, dated May 8, 2019.
According to IEC 60825-1:2014, EN 60825-1:2014 +A11:2021 and IEC 62471-5:2015, this projector may
become CLASS 1 LASER PRODUCT - RISK GROUP 3 product when installed with G-lens (throw ratio 2.90-
5.50).
To ensure safe operation, read all laser safety precautions before installing or operating the projector.
• This projector has one or several built-in Class 4 laser clusters. Disassembly or modification is very
dangerous and should never be attempted.
• Any operation or adjustment not specifically instructed by the user’s guide creates the risk of hazardous
laser radiation exposure.
• Do not open or disassemble the projector as this may cause damage by the exposure of laser radiation.
• As with any bright source, do not stare into the direct beam, RG2 IEC 62471-5:2015.
• No direct exposure to the beam shall be permitted, RG3 IEC 62471-5:2015 (When Throw Ratio large than
2.9).
• This projector is class 1 laser product of IEC 60825-1:2014, EN 60825-1:2014+A11:2021 and risk group 2
with the requirements of IEC 62471-5:2015.
• Operators shall control access to the beam within the hazard distance or install the product at the height
that will prevent exposures of spectators' eyes within the hazard distance (When Throw Ratio large than
2.9).
Safety