Barco G50, Руководство по установке

Страница: 23 / 76

23 R5916677 /00 G50
manufacturer’s warranty and may deem the warranty null and void. In such a case the client shall be held
solely responsible for all costs incurred during any repair. It is the clients responsibility to ensure at all times
that the projector is protected from the harmful effects of hostile airborne particles in the environment of the
projector. The manufacturer reserves the right to refuse repair if a projector has been subject to knowingly
neglect, abandon or improper use.
CAUTION: If the specified environmental conditions cannot be guaranteed (e.g., during construction
works), the projector must be removed, or switched off and fully protected until the requirements are
fulfilled.
Contact Barco in case uncertainty exist on the environmental conditions linked to air contamination
prior to install and operate the projector.
Main power requirements
The G50 projector operates from a nominal mono phase power net with a separate earth ground PE.
Projector Power requirements
G50-W6 AC INPUT 90-264V, 50/60Hz
G50-W7 AC INPUT 90-264V, 50/60Hz
G50-W8 AC INPUT 90-264V, 50/60Hz
The power cord required to connect the projector with the power net is delivered with the projector.
Projector weight
Do not underestimate the weight of the projector. Be sure that the pedestal or ceiling mount on which the
projector has to be installed is capable of handling five (5) times the complete load of the system.
Projector Weight (without lens)
G50-W6 11.0 kg / 24.25 lbs
G50-W7 11.8 kg / 26.0 lbs
G50-W8 13.0 kg / 28.66 lbs
Introduction