![background image](http://html1.mh-extra.com/html/barco/fsn-series/fsn-series_user-manual_3894029165.webp)
FSN Series • User’s Guide
165
5. Menu Orientation
Memory Menu
póëíÉã=bå~ÄäÉë
The figure below illustrates the Enables when the
SYS
(System) module is selected:
Figure 5-63.
SYS Enables
Following are descriptions of each System Enable. Remember that each can be toggled
on or off without restriction:
•
{Input Map}
— stores or recalls the panel’s current input mapping, as set on the
Map Buttons Menu
. Refer to the “
” section on page 210 for
a menu description.
•
{All Inputs}
— stores or recalls all input setup parameters (including the name)
for both native and universal inputs, as set on the
Input Setup Menu
. Refer to
the “
” section on page 187 for a menu description.
•
{Tally}
— stores or recalls all tally settings, as set on the
Tally Setup Menu
.
Refer to the “
” section on page 214 for a menu description.
^ìñ=bå~ÄäÉë
The figure below illustrates the available Enables when the
Aux
module is selected:
Figure 5-64.
Aux Enables
Following are descriptions of each Aux Enable. Remember that each can be toggled on or
off without restriction:
•
{Aux 1}
through
{Aux 6}
— stores or recalls the source assignment on the
selected Aux Bus. For example, if
CAM 1
is assigned to
Aux 2
, that association
will be stored or recalled in the memory register.