FSN Series • User’s Guide
163
5. Menu Orientation
Memory Menu
bå~ÄäÉ=aÉëÅêáéíáçåë
This section provides descriptions of each module’s Enables. The following topics are
discussed:
•
•
•
•
jLb=N=bå~ÄäÉë
The figure below illustrates the available Enables when the
M/E 1
module is selected:
Figure 5-59.
M/E 1 Enables
Following are descriptions of each M/E 1 Enable. Remember that each can be toggled on
or off without restriction:
•
{BG Bus}
— stores or recalls the source selected on the M/E’s BG bus.
•
{PST Bus}
— stores or recalls the source selected on the M/E’s PST bus.
•
{Key 1}
— stores or recalls all settings for Keyer 1, plus the selected key source.
•
{Key 2}
— stores or recalls all settings for Keyer 2, plus the selected key source.
•
{Effects}
— stores or recalls the selections in the M/E’s
Effects Group
and
Next
Transition Group
.
Figure 5-60.
Effects Enables, M/E 1
•
{Rate}
— stores or recalls the M/E’s transition rate.
•
{T-Bar}
— stores or recalls the position of the T-Bar.
Note
The
{BG Bus}
button does not store or recall input settings.
It only stores or recalls the source. Use “
System
” enables to
store and recall input settings.
BG
KEY
1
KEY
2
MIX
WIPE
FX
TRIG
Note
There is no separate “enable” button for
color background
settings. Each time you store the contents of the M/E, color
background settings are automatically stored.
