![background image](http://html1.mh-extra.com/html/barco/fsn-series/fsn-series_user-manual_3894029161.webp)
FSN Series • User’s Guide
161
5. Menu Orientation
Memory Menu
bå~ÄäÉë=jÉåì=aÉëÅêáéíáçå
From the
Memory Menu
, press
{Enables}
to display the
Enables Menu
, as shown below
in the
View Mode
.
Figure 5-58.
Enables Menu, View Mode (sample)
The
Enables Menu
provides a close-up view of the “selected” register only, and all of its
associated Enables. The menu can be accessed in all modes (
View
,
Store
and
Recall
),
but not all functions are available, depending on the selected mode.
Enables
themselves are arrays of sub-functions within an individual module, which can be
toggled on or off as desired. For example:
•
If you store a register that includes the M/E 1 module, there are seven Enables
within that module that divide the M/E into its various functional components.
•
You can elect to leave all enables on (and thus store or recall the
entire
M/E), or
you can elect to turn specific Enables on or off (and thus store or recall only a
portion
of the M/E). Refer to the “
” section on page 163 for a
complete explanation of each module’s Enables.
The
Enables Menu
is divided into three sections:
•
Register Table
— The
top portion of the menu provides the same table as the
Memory Menu
, but only the selected register is shown. All column headings are
identical, including the space above the three left-hand columns which is reserved
for the large
STORE
and
RECALL
labels.