![background image](http://html1.mh-extra.com/html/barco/fs40-4k/fs40-4k_safety-manual_4141681005.webp)
5
R5913246 /00
FL-FS40 MKII SERIES
sofa, rug, or other similar surface. This product should never be placed near or over a radiator or heat register. The device should not
be placed in a built-in installation or enclosure unless proper ventilation is provided. Ensure that nothing can be spilled on, or dropped
inside the projector. If this does happen, switch off and unplug the mains supply immediately. Do not operate the projector again until it
has been checked by Barco authorized service personnel.
•
Do not block the projector cooling fans or free air movement around the projector. Minimum safety distance to the exhaust area of the
unit must not be less than 25 cm (10
”
) and to the intake area, not less than 25 cm (10
”
).
•
Do not use this equipment near water.
•
Do not operate the projector outside its temperature and humidity specifications as this may result in overheating and malfunction.
•
Never place the projector in direct sun light. Sun light on the lens can severely damage the Digital Mirror Devices
™
in which case
there is a loss of warranty.
•
Save the original shipping carton and packing material. They will come in handy if you ever have to ship your equipment. For
maximum protection, repack your set as it was originally packed at the factory.
•
Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
Never use strong solvents, such as thinner or benzine, or abrasive cleaners, since these will damage the cabinet. Stubborn stains may
be removed with a cloth lightly dampened with mild detergent solution.
•
To ensure the highest optical performance and resolution, the projection lenses are specially treated with an anti-reflective coating,
therefore, avoid touching the lens. To remove dust on the lens, use a soft dry cloth. Do not use a damp cloth, detergent solution, or
thinner.
On servicing
•
Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage potentials and
risk of electric shock.
•
Refer all servicing to Barco authorized repair centers.
•
Attempts to alter the factory-set internal controls or to change other control settings not specially discussed in this manual can lead to
permanent damage to the projector and cancellation of the warranty.
•
Unplug this product from the wall outlet and refer servicing to Barco authorized service personnel or technicians under the following
conditions:
-
If liquid has been spilled into the equipment.
-
If the product has been exposed to rain or water.
-
If the product does not operate normally when the operating instructions are followed. Adjust only those controls that are covered
by the operating instructions since improper adjustment of the other controls may result in damage and will often require extensive
work by a qualified technician to restore the product to normal operation.
-
If the product has been dropped or the cabinet has been damaged.
-
If the product exhibits a distinct change in performance, indicating a need for service.
-
When the power cord or plug is damaged or frayed.
•
Replacement parts: When replacement parts are required, be sure the service technician has used original Barco replacement parts.
Unauthorized substitutions may result in degraded performance and reliability, fire, electric shock or other hazards. Unauthorized
substitutions may void warranty.
•
Safety check: Upon completion of any service or repairs to this projector, ask the service technician to perform safety checks to
determine that the product is in proper operating condition.
1.3 Safety Symbols FL40 / FS40
Description of safety symbols used in product documentation or on product.
Image
Description
Refer to user manual for further information!
Caution! Do not stare into beam, RG2 product.
No telephone! Do not connect to telephone
lines.
Содержание FS40 - 4K
Страница 1: ...ENABLING BRIGHT OUTCOMES Safety Manual FL FS40 MKII SERIES...
Страница 10: ...R5913246 00 FL FS40 MKII SERIES 10 Safety and environmental information...
Страница 11: ......