![background image](http://html1.mh-extra.com/html/barco/flm-series/flm-series_service-manual_4137254139.webp)
14. Lens holder
F
F
F
Image 14-15
4. Adjust the screw of the lens holder tilt mechanism until the mid top and mid bottom of the projected pattern is most sharp on the
screen. Use a 5,5 mm nut driver or a flat screw driver.
Tip:
Use a white paper to search for the “sharp focus plane” at the top or bottom side of the projected pattern. Turn the
adjustment screw a bit and check if the sharp focus plane has come closer to the screen. If not, turn the adjustment
screw in the opposite direction and check again.
Note:
A simultaneous readjustment of the focus shift plate will be necessary to get the mid top and mid bottom of the projected
pattern equally focused as the centre.
Image 14-16
5. Repeat from step 2 until the projected focus pattern is as sharp as possible in the centre, left, right, top and bottom of the screen.
6. Fasten all lock screws of the lens holder adjustment mechanism.
Image 14-17
7. Reinstall the top cover, the side cover and the front cover of the projector. See owners manual of the projector for detailed cover
installation procedures.
R59770072 FLM SERIES 19/03/2007
137
Содержание FLM series
