Barco FLM HD18, Руководство пользователя

Страница: 183 / 193

D. Specifications
Input signal R / P
R
G / Y B / P
B
H / S V
Component Video
- SS P
R
/ (R - Y) Y P
B
/ (B - Y) S
composite sync
—
Component Video
- SOY P
R
/ (R - Y) Ys P
B
/ (B - Y)
— —
Specifications
• Data and HD sources RGB and YUV [HS/VS, CS or SOG(Y)]:
- pixelclock maximum 275MHz
- 8 bit digital output
• Mode configurations:
- RGB HS/VS - CS, RGB SOG
- YUV HS/VS - CS, YUV SOY
• Possible to disconnect 75 Ohm terminations on HS and VS (TTL sync level selection)
• Signal requirements:
- Component Video (BNC)
o
R-Y : 0,7Vpp ±3dB 75 Ohm termination.
o
Ys : 1Vpp ±3dB (0,7V Luma +0,3V Sync) 75 Ohm termination.
o
B-Y : 0,7Vpp ±3dB 75 Ohm termination.
- RG(s)B
o
R : 0,7Vpp ±3dB 75 Ohm termination.
o
G(s) : 1Vpp ±3dB (0,7Vpp G + 0,3Vpp Sync) 75 Ohm termination.
o
B : 0,7Vpp ±3dB 75 Ohm termination.
• Diagnostic LED’s on front panel:
- Green LED: Lights up in case input module is selected
- Yellow LED: Lights up in case sync detected
D.4 Specifications FLM HDSDI – SDI input
Input front view HDSDI – SDI input
HDSDI - SDI input
Input 1
Input 2 Loop output
Sync OK
Sel
Image D-3
R5976986 FLM HD18 01/09/2006 179