![background image](http://html1.mh-extra.com/html/barco/fl40-series/fl40-series_quick-start-manual_4129057006.webp)
ENABLING BRIGHT OUTCOMES
Software upgrade
Software upgrade
The projector is now ready for normal operation.
1.
Go to www.barco.com and select your product. All available firmware downloads are filed under
the Technical Downloads tab
2
. Download the firmware. Extract and save the file to a USB Stick with FAT file system. Use the eject function on
your PC to safely remove the device from your computer.
3.
Place the projector in Standby mode (status indicator is steady white).
4.
Insert the USB stick into one of the projector’s rear USB ports.
After a few seconds, the status indicator will flash. (Rate: 3 Hz/180 FPM). This signals that the upgrade is in progress.
If the upgrade file is corrupt or invalid, the status indicator will turn red and the upgrade process will stop.
Note! The upgrade will not be installed in this instance, and the upgrade process must be restarted with a full and correct file.
The projector may restart several times during the upgrade process
5.
The LCD display will show the progress of the update procedure, and also when the USB stick must be removed.
The projector will return to standby mode (status indicator is steady) once the upgrade is completed successfully.
NOTE !
Once initiated, the upgrade procedure can take up to 20 minutes to complete.
CAUTION !
Do NOT turn off, power down, or remove mains
power supply to the projector when an upgrade is in progress.
Doc No: R5910124 / 02