Barco F90-W13, Руководство пользователя, Страница: 30 / 57

4. Physical installation
Environment Ambient operating
temperature Relative humidity
Storage Conditions
1500 – 3000 M 10 to 35 °C 10 to 80 % -20 to 60 °C, 10 – 90 %
Maximum air fl ow 900 m 3 / hour
-
NA
AutoDim function
The F90 AutoDim function is integrated in the projector fi rmware. The projector continually senses and calculates the ambient
temperature in the installation location and will, when necessary, automatically dim the light output if the projector is operating in the
extreme ends of the recommended ambient environmental conditions, as illustrated in the graph below.
70
75
80
85
90
95
100
34 35 36 37 38 39 40 41 42 43 44 45
Light Output
[%
]
Ambient Temperature [
o
C]
Rel. Humidity=45%
Rel. Humidity=55%
Rel. Humidity=65%
Rel. Humidity=80%
Image 4-1
Mains power requirements
Projector Power requirements
F90 110 — 240 V, 50 — 60 Hz
To protect operating personnel, the National Electrical Manufacturers Association (NEMA) recommends that the instrument panel
and cabinet be grounded.
In no event shall this projector be operated without an adequate cabinet ground connection.
The AC supply must be installed by a quali fi ed electrician in conformance to local codes. Hardware, wire sizes and conduit types
must comply with local codes.
AutoDim function will be activated when mains power are 110V or below.
26 601–0400–00 F90–W13 18/08/2016