![background image](http://html1.mh-extra.com/html/barco/f400-hr/f400-hr_quick-reference-manual_4114425004.webp)
- 4 -
Install a lens
1.
Ensure that the combined handle is in the open position by pulling the release handle out (reference 1).
The locking handle (reference 2) will
“
follow
”
.
2.
Insert the lens in to the correct position. Ensure that the lens connector (reference 3) matches the
electrical socket on the lens holder.
3.
Press the locking handle inwards until it is in locked position. (a
“
click
”
will be felt and heard).
3
2
1
4.
Ensure that the lens has a firm connection to the projector, without any slack.
Remove a lens
1.
Support the lens with one hand.
2.
Release the lens lock by pulling the release handle (reference 1). The locking handle (reference 2) will
follow, and the lens will come loose.
2
1
Power up the projector
1.
Connect the mains power cord to the power inlet connector.
2.
The projector will perform the startup sequence. When ready, the power button on the keyboard will
illuminate white, meaning that the projector is in ready mode.
3.
Press the Power button on the keypad or remote. The power button will after some seconds illuminate
solid blue, meaning that the projector is ON.