2. Installation
2. INSTALLATION
W
ARNING
:
Read all the important safety information before installing and operating
your monitor. Please refer to the dedicated chapter in this user guide.
W
ARNING
:
Suf
fi
cient expertise is required to install this equipment. All devices and
complete setup must be tested before taking into operation.
C
AUTION
:
When the display is assembled in the medical system, take care of the
fi
xa-
tion of all cables, to avoid unwanted detachment.
C
AUTION
:
The monitor is not intended to be sterilized.
2.1
Cable connections
To connect the cables
1. Connect one or more video source(s) to the corresponding video inputs. Use the appropriate video
cable(s) to do this.
The input source to be displayed can be selected in the OSD menus (see "Input source selection", page
13).
Image 2-1
2. Connect the USB upstream connector to a PC USB host to make use of QAWeb or any of the display
USB downstream connectors (e.g. to connect a keyboard, mouse or other peripheral).
K5902146 (451920612622) EONIS 12/01/2018
7
