Barco Duet II, Руководство пользователя

Страница: 49 / 65

6. Installation Mode
Analog The Analog connectors (5x BNC) are used as Output Channels
DVI The DVI connectors are used as Output Channels
Both Both Analog and DVI connectors are used as Output Channels
4. Press
ENTER
to confirm.
Note: The current Output Channel is displayed on top of the menu.
Duet II Interface
Output Channel
Hi Bright Stereo
First Image Select
Please select item
Menu 6-5
Duet II Interface
Current: Both
Analog
DVI
Both
Please select item
Menu 6-6
6.3.3 High Bright Stereo
When to use High Bright Stereo?
Set High Bright Stereo to ’On’ when using Non Stereo Optimized Projectors in a Passive Stereo Configuration.
How to Change the High Bright Stereo Setting?
1. Push the cursor key ↑ or ↓ to highlight
Hi Bright Stereo
. (menu 6-7)
2. Press
ENTER
to select.
The
High Bright Stereo
menu will be displayed. (menu 6-8)
3. Push the cursor key ↑ or ↓ to select the desired High Bright Stereo Setting.
4. Press
ENTER
to confirm.
Note: The current High Bright Setting is displayed on top of the menu.
Duet II Interface
Output Channel
Hi Bright Stereo
First Image Select
Please select item
Menu 6-7
Duet II Interface
Current: Off
Hi Bright On
Hi Bright Off
Please select item
Menu 6-8
6.3.4 First Image Select
When to adjust First Image Select?
This adjustment is best done when projecting a non moving image.
Green Convergence Errors will occur when the wrong First Image is selected, this will be emphasized when the High Brightness
Setting is set to ’On’. Adjust the First Image Selection to correct these Green Convergence Errors.
How to Set the First Image Selection?
1. Push the cursor key ↑ or ↓ to highlight
First Image Select
. (menu 6-9)
2. Press
ENTER
to select.
The
First Image Select
menu will be displayed. (menu 6-10)
R5976550 BARCO DUET II 10/05/2007 45