Barco DP2K SLP Series, Руководство пользователя и инструкция по установке

Страница: 118 / 175

12. Color calibration
12.1 Calibration process
Overview
1. Select the desired aspect ratio by activating the correct lens fi le.
- SCOPE format
- FLAT format
2. Color gamut calibration . (electronic P7 correction). Measured values are saved in the Measured Color Gamut Data (MCGD)
fi le. Needs to be done per format and per projection mode.
- 2D
- External 3D
3. Select target colors . The target colors are stored in the Target Color Gamut Data (TCGD) fi le. Several TCGD fi les are already
available in the fi le system of the projector.
For more info about color gamut calibration see "Color gamut calibration", page 115. The Communicator software contains a
wizard for color gamut calibration. See user guide of the Communicator for detailed menu navigation instructions.
4. Verify corrected colors .
For detailed instructions on how to verify corrected colors see user guide of Communicator.
5. Arrange calibration fi les in macro . To apply correct color calibration it is important that the MCGD fi le(s) and matching TCGD
fi le(s) are activated after that the INPUT fi le and PCF fi le are activated. For that it is recommended to create a macro where the
fi les are loaded one by one in the right order:
a) First activate the INPUT fi le.
b) then activate the PCF fi le (PCF already contains plane 1 information),
c) then activate the MCGD and TCGD fi les.
For detailed instructions on how to create a macro see Communicator’s user guide.
114 R5906847 DP2K SLP SERIES 02/06/2017