Barco DP2K--20C, Руководство по установке

Страница: 32 / 141

4. Lamp & lamp house
4.1 Introduction
Lamp & lamp house
Normally the lamp house of the DP2K-20C projector is delivered with a mounted 4000 watt lamp. In case the xenon lamp is delivered
separately the lamp has to be installed on site by a quali
fi ed service technician.
B A
Image 4-1
A
Lamp house.
B Xenon lamp.
The xenon lamp is packed in a protective container or wrapped in a protective cloth. Never remove this protective container or
protective cloth without wearing adequate protective clothing (face shield, clean leather glovers, welder’s jacket).
Image 4-2
Left: Xenon lamp in protective container. Right: Xenon lamp wrapped in protective cloth.
C
AUTION
:
Xenon compact arc lamps are highly pressurized. When ignited, the normal operating temperature
of the bulb increases the pressure to a level at which the bulb may explode if not handled in strict accordance
to the manufacturer’s instructions. The bulb is stable at room temperature, but may still explode if dropped or
otherwise mishandled. Whenever the lamp house, containing a xenon lamp, has to be dismantled or whenever
the protective container or cloth has to be removed from the xenon lamp, authorized protective clothing MUST
be worn!
Cathode adaptor
A cathode adaptor is required to mount the xenon lamp in the lamp house. The cathode adapter has to be mounted upon the cathode
side of the xenon lamp prior to mounting the lamp in the lamp house. The purpose of the cathode adapter is to position the arc of
the xenon lamp in the middle of the re
fl ector inside the lamp house.
Image 4-3
Cathode adaptor (
R858100K )
Supported xenon bulb lamps (without lamp house)
Lamp Type Order info
Osram xenon lamp of 4 kW 4kW DHP R9855937
26 R59770351 DP2K-20C 02/02/2010