Barco DML-1200, Руководство пользователя

Страница: 93 / 113

13. Servicing
A
B
Image 13-30
Open reservoir
5. Loosen the bleed lid a little so that air can enter and close the bleed lid again. Turn the reservoir again in its horizontal position.
6. Turn on the bolt so that the white indication line is in the Open area (membrane is at the bottom of the reservoir).
7. Rotate the reservoir until it is in a vertical position.
Note: Be careful not to kink the tubing. If necessary, remove the cable tie around the tubing and pull on the tubes while rotating
the reservoir.
8. Turn the bleed lid a little and take it out (B)
9. Turn out the third lid using the back of the main lid.
C D
Image 13-31
Remove third lid
10.Top-up the reservoir with cooling liquid until the level is somewhat higher than the hole in the reservoir.
Image 13-32
Top-up reservoir
R59770208 DML-1200 06/11/2009 89