manualshive.com logo in svg

Barco CR series, Руководство пользователя, Страница: 51 / 54

Поделиться
Скачать
Barco CR series Скачать руководство пользователя страница 51

english

51

Please refer to our website to download the required files or seek other information

8  Maintenance

8.1  Software upgrades

In order to upgrade your projector, please follow the method and sequence described below.

•  You will need a USB memory stick set up with a FAT-file system to perform this upgrade

•  Access the upgrade software from the following web-address;  

www.projectiondesign.com

•   Download and save the firmware.zip-file to your PC desktop

•  Unzip and extract the firmware file to the root of a memory stick 

PS! Important that the USB is safely removed from computer, using the eject function on your PC.

•  Set the projector in standby mode

•  Insert the memory stick in the projector and wait for a few seconds

•  The LCD display will indicate that it has detected an upgrade file on the memory stick. 

Wait a few seconds while the file is validated

•  Remove the memory stick when the LCD display instructs you to do so. 

•  Do not remove the power cord while the upgrade is still in progress

•  The projector may restart several times during the upgrade

The upgrade has finished successfully when the ordinary LCD display returns.

 

Содержание CR series























































Отзывы:

Нет отзывов