Barco CR series Скачать руководство пользователя страница 28 | Manualshive

Страница: 28 / 54

Barco CR series Скачать руководство пользователя страница 28

english

28

User Manual - Basic setup

CR series
User Manual - Basic setup

5.6.4

Attaching X-PORT™ modules

X-PORT™ modules are separately available for purchase and not included
with the base projector.

Switch off projector and disconnect power cord before attaching X-PORT™ module.
Before attaching any X-PORT module, please make sure you have the latest SW run-
ning on the projector. Please go to www.projectiondesign.com to download the current
SW and update the projector accordingly. See chapter 8 for details on how to upgrade
the projector SW.

The projector supports up to two X-PORT™ modules simultaneously:

- X-PORT™ 1 for additional image processing (X-PORT™ DCC120*). Left hand side.

- X-PORT™ 2 for additional connectivity (X-PORT™ 3G-SDI, X-PORT™ DisplayPort 1.1a

and X-PORT™ HDMI 3D*). Right hand side.

*X-PORT™ modules subject to availability.

To attach an X-PORT™ module, please follow this procedure:

A

Remove cover plate, by removing the four screws.

B

Attach module. Observe X-PORT™ 1 and 2 positions are different. Attaching X-PORT™

modules in the wrong position will leave the module non-functional, but it is not
destructive.

C

Fix the four mounting screws securely.

*

Features in the user guide pictures/drawings may be different from your projector depending on model/version.

Finally connect power cord and switch on projector.

The first time after a module is attached, the projector will automatically update and
configure the module. This may take a few minutes. Please ensure that power
remains on during this period.

Remove 4
retainer screws

Mount X-PORT module

Fasten 4
module
screws

B

A

C

«
...
26
27
28
29
30
...
»

Содержание CR series























































Отзывы:

Нет отзывов