![background image](http://html1.mh-extra.com/html/barco/coronis-fusion/coronis-fusion_getting-started-manual_3890436032.webp)
Installing the system
32
6.
After routing the cables, re-attach the display stand cover.
7.
Startup the display.
Note:
When after startup you wish to change the screen
resolution, try to do so in the display control panel on the
computer. If you cannot select the desired resolution in the
control panel, you need to select the desired resolution in the
display OSD by means of the
Preferred Input
function in the
Settings menu. After changing this setting, you must reboot the
PC so that the graphic board adapts to the new setting. This
works only with plug-and-play graphic boards.
If you still cannot select the desired resolution, make sure the
Hide modes that this monitor cannot display
option in the
control panel, Advanced Settings, Monitor tab is not checked
(see image below).
Figure 13: Control panel
Содержание Coronis Fusion
