![background image](http://html.mh-extra.com/html/barco/cooler-rigging-frame/cooler-rigging-frame_installation-manual_474418012.webp)
1. Cooler rigging frame
X mm
Image 1-13
Example of clamps installation
3. Place the cooler frame under the truss installation and lower the truss until the support bars of the truss are nearby the rigging
clamps mounted on the rigging frame.
Image 1-14
Example of mounting to truss
Warning:
Always secure the rigging points after adjustment.
4. Lock all four rigging clamps by turning the
fi
xation handle clockwise.
Image 1-15
Example of clamp
fi
xation
5. Install 2 safety cables, one on both sides of the rigging frame and around the truss.
Mount the 2 safety cables around the frame bar (push the hook through the loop and then around the truss so that there is not to
much play (maximum 20 cm). If necessary turn the cable a few times around the truss before clasping the safety hook around
the cable.
8
R5906813 COOLER RIGGING FRAME 13/12/2016