Barco CLM, Руководство по установке

Страница: 10 / 10

3. Installation procedures
4. Pull the cables through the gap in the optical base.
3.2 Mounting the new cables
Necessary parts
Wire ties
How to mount
1. Unpack the cables and mark both sides as described in the next table.
Cable number Indication on cable
Z3472031 /
Z3472032 //
Z3472033 ///
Z3472034 ////
2. Pull one side of each cable through the gap in the optical base.
Tip: It can be handy to take out lamp 3 to get more access space to the gap.
3. At the bottom side, plug one side of the cables in the correct position.
Cable with mark : Into lamp : Connector number
/ lamp 1 J501
// lamp 2 J502
/// lamp 3 J503
//// lamp 4 J504
4. At the lamp side, plug the other side of the cable in the lamp connectors.
Cable with mark : Into lamp :
/ lamp 1
// lamp 2
/// lamp 3
//// lamp 4
5. Tie up the lamp info cables.
3.3 Finalizing the installation procedure
Overview
1. Mount the bottom cover and the support feet.
2. Mount the both side covers.
3. Mount the top cover.
4. Mount the lamp door.
5. Mount the back cover
6. Mount the lens.
7. Mount the front cover.
8 R59770193 LAMP INFO CABLES CLM 14/02/2008