32
CLM W6
4. User Controls
Sharpness
Adjust the sharpness of the image.
Press the ◄ to decrease the sharpness.
Press the ► to increase the sharpness.
Noise Reduction
Reduce temporary and/or spatial noise in the image.
Press the ◄ to decrease the noise.
Press the ► to increase the noise.
Color Temp
Adjust the color temperature of the image.
Native: Default value. Native is about 5500K.
3200K: Apply about 3200K color temperature.
5400K: Apply about 5400K color temperature.
6500K: Apply about 6500K color temperature.
8800K: Apply about 8800K color temperature.
Input Balance
Adjust the gain and offset of the red, green, or blue channel of the image.
This is similar to adjusting contrast, but only affects a single color channel.
Offset: Refer to the control of color imbalance in the darker areas of the
projected image.
Gain: Refer to the control of color imbalance in the brighter areas of the
projected image.
Press the ◄ to decrease the input balance.
Press the ► to increase the input balance.
Aspect Ratio
Adjust the aspect ratio of the image.
Native: the original aspect ratio of the source is kept and fit to screen.
This is height or width whatever comes first.
5:4: The input image is resized to a 5:4 aspect ratio.
4:3: The input image is resized to a 4:3 aspect ratio.
16:10: The input image is resized to a 16:10 aspect ratio.
16:9: The input image is resized to a 16:9 aspect ratio.
1.88: The input image is resized to a 1.88:1 aspect ratio.
2.35: The input image is resized to a 2.35:1 aspect ratio.
Unscaled: 1:1 mapping center (If the resolution is bigger than the chip
resolution, the image will be cropped.)
